Stain-Gard WB (Impregnator) is a water based impregnator - a safe, low odour alternative to solvent impregnators. Stain-Gard WB (Impregnator) can be used for impregnating most natural stone and unglazed Ceramic tiles. Impregnating helps to prevent staining from water and oil based spills. It produces an invisible, highly protective shield, both within the stone and on the surface.
Stain-Gard WB (Impregnator) will help prevent the stone from becoming stained by repelling daily dirt and grime, making cleaning and maintenance easier.
For use on marble, granite, terrazzo, travertine, sandstone, limestone, brick sets, york stone, amalgamated stone, slate and un-glazed Ceramic tiles.
Particularly useful in kitchens, utility areas, bathrooms, shower rooms, dining rooms and all other areas where spillages may occur.
Stain-Guard WB
Invert container before use
Ensure the area to be treated is clean and free from any residues, dust and dirt.
Using a clean dry cloth, applicator, sponge, brush or roller, apply a thin, even coat over the area to be treated.
When dry, apply a second coat (more absorbent surfaces may require additional coats).
To remove any excess, wait until most of the product has been absorbed and use Stain-Gard WB applied by cloth to remove any excess. Buff up and polish areas with a clean, dry cloth.
DRYING TIME: Product should be touch dry after 3-4 hours, and fully cured within 24-36 hours.
COVERAGE:-
On polished/less absorbent surfaces, approx 20-45 sq mtrs per litre (20-50ml per sq mtr).
On absorbent surfaces, 10-20 sq mtrs (50-100ml per sq mtr)
PRODUCT ADVICE:
Ensure under floor heating is turned off and allow floor to cool prior to application.
Test product for any colour change in an inconspicuous area before use.