Stain-Guard SB

Stain-Gard SB tile sealer is a fast and easy option for sealing/impregnating natural & man-made tiles. It forms an invisible protective shield on the surface that penetrates deep into the stone to help prevent staining from both water and oil based spills.


Stain-Gard SB Sealer Impregnator will help prevent permanent staining of surfaces by repelling daily spills, dirt and grime and makes cleaning and maintenance considerably easier.


Stain-Gard SB Sealer Impregnator can be used on terrazzo, travertine, sandstone, limestone, brick sets, York stone, amalgamated stone, slate, un-glazed Ceramic tiles. It is particularly useful in kitchens, utility areas, bathrooms, shower rooms, dining rooms and all other areas where spillages may occur.

Stain-Guard SB

  • Invert container before use


    Use only in a well ventilated area.


    The surface to be treated must be clean, free from any residues dust and dirt. If required, use Wax & Residue Remover prior to application


    Using a clean dry cloth, applicator, sponge, brush or roller, apply a thin and even coat over the area to be treated, when dry apply a second coat (more absorbent surfaces may require additional coats).


    Wait until most of the product has been absorbed and use Stain-Gard SB applied by cloth to remove any excess product - buff up and polish areas with a clean cloth.


    DRYING TIME:   May vary from floor to floor; product should be touch dry after 1-3 hours, and fully cured within 24-36 hours.


    COVERAGE:   Approx. 20-45 sq mtrs per litre (20-50ml per sq mtr) on polished/less absorbant surfaces. 10-20 sq mtrs per litre on absorbant surfaces (50-100 ml per sq metre)


    PRODUCT ADVICE:   Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.