Colour Enhancing Impregnator

Colour Enhancing Impregnator produces an invisible protective shield, both in the capillaries and on the surface of the tiles. This helps prevent tiles from becoming stained by repelling water/oil based spills, daily dirt and grime.


Colour Enhancing Impregnator can be used on terrazzo, travertine, sandstone, limestone, brick sets, york stone, amalgamated stone, slate, and un-glazed ceramic tiles. This product is particularly useful in kitchens, utility areas, bathrooms, shower rooms, dining rooms and all other areas where spillages may occur.


Colour Enhancing Impregnator is also superb for not only removing Efflorescence (white stains) from brickwork, but also preventing the white stains from reappearing. The product seals the brickwork after removal but also allows the stone breath naturally.


PLEASE NOTE: Do not use Colour Enhancing Impregnator if applying  Professional Slate Sealer, or any other sealer.

Colour Enhancing Impregnator

  •  Invert container before use – Ensure the area to be treated is clean and free from dust and dirt.


    Using a clean dry cloth, applicator, sponge, brush or roller, apply a thin and even coat over the area to be treated, wait 30 minutes, and apply a second application, wait until most of the product has been absorbed.


    Remove any excess product with a clean dry cloth; buff up and polish areas with a clean cloth, removing any residue.


    On very porous surfaces, may be re-applied several times – Allow each coat to dry before applying additional coats



    Approx. 5-8 sq mtrs per litre on highly absorbent surfaces.

    Up to 15 sq mtrs on polished surfaces.

    Up to 35 sq mtrs on very dense stones.


    PRODUCT ADVICE:   Ensure under floor heating is turned off and allow floor to cool prior to application. Test product for any colour change in an inconspicuous area before use.


    IMPORTANT:   On polished surfaces - leave 5 – 10 minutes and wipe off, re-apply if required.

    DO NOT allow product to dry without wiping off.

  • Use only in a well ventilated areas. Wear appropriate safety gloves, eye protection, and respirator when using this product. In confined areas where adequate ventilation is not available, respirators or masks must be worn.